ostvarite do 70% popusta na SMT dijelove – na lageru i spremni za isporuku

Zatražite ponudu →
Zatražite ponudu
|
enEN idid sksk srpsr swesv itit ptpt benbn mayms belbe nlnl frafr thth vievi ruru jpja korko dede armhy azeaz bosbs bulbg burmy cscs danda divdv elel estet filfil finfi glega glggl grngn hebhe hihi hkmkm hrvhr huhu iceis kankn kinrw laolo lavlv litlt ltzlb luglg maomi mltmt nepne norno nyany orior ormom perper plpl romro sansa somso spaes swasw tamta trtr ukruk urdur welcy xhoxh
Used AFC Plus project matching

Match a Used ASMPT AMICRA AFC Plus to Your Bonding Project

Start with a current machine, then compare its installed handling, process modules, tooling and available evidence with your die-bonding requirements.

The goal is to identify which physical unit is worth further review, what is already confirmed and what still needs clarification before quotation.

View Current AFC Plus Equipment Send My Project Requirements
Physical machine first Begin from an identifiable used-equipment record.
Configuration gap review Separate confirmed items from remaining questions.
Clearer quotation scope Connect the machine, tooling and agreed support.
Current AFC Plus equipment path Used ASMPT AMICRA AFC Plus machine for project matching
Machine-specific review Select the physical machine first.

Open the equipment record below, then compare its installed configuration with your project requirements.

Choose the closest process direction

Which AFC Plus Project Direction Is Closest to Yours?

You do not need to define every machine option at the beginning. Select the process direction that most closely describes the project, then focus the machine review on the structures that can affect that route.

01

Pričvršćivač epoksidnog kalupa

The die is picked, aligned and attached to a substrate with an adhesive material.

What should be checked on the machine

Review the incoming die format, pickup tooling, adhesive-transfer method, substrate holding and any curing-related requirement.

Istražite opremu za lijepljenje kalupima
02

Eutectic Die Bonding

The connection depends on controlled heating, defined contact conditions or a eutectic bonding path.

What should be checked on the machine

Review the installed heating arrangement, temperature-control equipment, bonding tools, substrate support and available thermal-system evidence.

Check the Required Machine Configuration
03

Lijepljenje preklapanjem čipova

The die must be turned and bonded with its active side facing the substrate.

What should be checked on the machine

Review the installed flipping and transfer arrangement, vision relationship, software functions, bonding tools and included accessories.

Explore Flip Chip Bonder Equipment

The process direction shows what the project may require. The next step is to compare those requirements with the real configuration of the selected physical machine.

Compare the project with the machine →
The core matching step

Compare Your Project With the Actual Machine Configuration

GEEKVALUE compares the information available from the project with the configuration, tooling and evidence available for the individual machine. Unknown items remain unconfirmed rather than being assumed.

Your project

What the Machine Is Expected to Do

Die and incoming material

What is being bonded, its approximate dimensions and how the die is presented to the process.

Bonding direction

Epoxy die attach, eutectic bonding, flip chip bonding or another already defined route.

Substrate or carrier

What receives the die and whether special holding, support or heating conditions are required.

Potreban rezultat

The intended orientation, alignment result, inspection requirement and next production step.

The selected used machine

What We Review on the Actual Unit

Installed handling arrangement

The real loading, pickup, transfer and orientation equipment present on the machine.

Bonding and process equipment

The installed bonding, heating, adhesive-transfer or flip-chip-related structures.

Vision, software and inspection

The known alignment, mapping, inspection and program functions available on the unit.

Tooling, accessories and evidence

The included tools, fixtures, files, photographs and any additional machine review that can be discussed.

Initial matching result

A Clearer Decision Before Detailed Quotation

The review should show whether the selected machine is worth further evaluation and which questions must be resolved before the equipment and delivery scope are finalized.

Relevant machine candidateWhether the selected unit is close enough to the planned process for further review.
Confirmed configurationWhich functions, tools or accessories are already supported by machine information.
Remaining gapsWhich details still require evidence, clarification or further discussion.
Quotation scopeWhich equipment, accessories and agreed services should appear in the offer.
Send Your Project for Machine Matching
What to send first

Start With the Project Information You Already Have

A complete process specification is not required for the first inquiry. Four basic pieces of information are enough to begin a machine-specific discussion.

  1. 01
    What is being bonded?

    Describe the die, component or assembly in simple terms.

  2. 02
    How is the die supplied?

    Share whether it comes from a wafer, tray, carrier or another presentation format.

  3. 03
    Which bonding method is planned?

    State whether the project uses epoxy, eutectic, flip chip or another known process.

  4. 04
    Is there a useful reference?

    Add an existing machine, drawing, tool, process photo or sample description when available.

Before requesting a match

Used AFC Plus Project Matching FAQ

These answers focus on the questions that affect whether a physical machine should move forward to quotation or further review.

Does every used AFC Plus have the same configuration?

No. Machines with the same model name may differ in handling equipment, process modules, vision functions, software, tooling, accessories and condition. Each physical unit should be reviewed separately.

Can GEEKVALUE confirm that a machine will run my production process?

The initial review compares available project information with the known machine configuration and identifies remaining questions. It does not replace complete process validation or guarantee production results.

What happens when part of the configuration is not documented?

The item should remain unconfirmed rather than being assumed. Additional photos, configuration records, remote video or an agreed test review may be discussed according to access, location, tooling and operating condition.

Do I need a complete technical specification before contacting you?

No. Begin with what is being bonded, how the die is supplied, the planned bonding method and any useful reference. More detailed questions can be handled after a specific machine is selected for further review.

Send Project for Machine Matching

Zašto toliko ljudi bira saradnju sa GeekValue-om?

Naš brend se širi iz grada u grad, a bezbrojni ljudi su me pitali: "Šta je GeekValue?" To proizilazi iz jednostavne vizije: osnažiti kineske inovacije najsavremenijom tehnologijom. Ovo je duh brenda koji se zasniva na kontinuiranom poboljšanju, skriven u našoj neumornoj potrazi za detaljima i oduševljenju prevazilaženjem očekivanja sa svakom isporukom. Ova gotovo opsesivna vještina i posvećenost nisu samo upornost naših osnivača, već i suština i toplina našeg brenda. Nadamo se da ćete ovdje početi i dati nam priliku da stvorimo savršenstvo. Hajde da zajedno radimo na stvaranju sljedećeg čuda "bez grešaka".

Detalji

Kontaktirajte stručnjaka za prodaju

Obratite se našem prodajnom timu kako biste istražili prilagođena rješenja koja savršeno odgovaraju vašim poslovnim potrebama i odgovorili na sva vaša pitanja.

Zahtjev za prodaju

Pratite nas

Ostanite povezani s nama kako biste otkrili najnovije inovacije, ekskluzivne ponude i uvide koji će vaše poslovanje podići na viši nivo.

Brza navigacija

KONTAKTIRAJTE NAS

Kontakt adresa:

Br. 18, Industrijska cesta Shangliao, grad Shajing, okrug Baoan, Shenzhen, Kina

Broj telefona za konsultacije:

+86 13823218491

E-pošta:

smt-sales3@gdxinling.cn

Alibaba prodavnica

Prodavnica proizvedeno u Kini

© Sva prava pridržana. Tehnička podrška: TiaoQingCMS

kfweixin

Skenirajte da biste dodali WeChat

Zatražite ponudu