ASMPT FT2018 Test Handler | Used & Refurbished Equipment

The ASMPT FT2018 is a fully automatic turret-based test system designed for high-volume testing, inspection and packing of small semiconductor devices.

With an 18-nozzle turret configuration, support for up to eight parallel test stations and six-sided vision inspection, the FT2018 is suitable for processing devices measuring from 1 × 1 mm² to 6 × 6 mm².

It can be used for BGA, SOT, SOD, SC, DFN, QFN, SMA, WLCSP, magnetic sensors, optical sensors and other small semiconductor packages.

We supply used and refurbished ASMPT FT2018 machines according to actual availability. Machine year, software version, tester interface, test-site configuration, input system and output configuration should be confirmed before ordering.

ASMPT FT2018 Specifications

Actual throughput depends on the device package, test time, number of active test sites, tester configuration, loading method and production setup.

Key Features

High-Speed Turret Handling

The FT2018 uses an 18-nozzle turret system to transfer semiconductor devices between loading, alignment, testing, inspection and packing stations.

Its turret-based design makes it suitable for high-volume production of small semiconductor components where stable device handling and short transfer cycles are required.

Up to Eight Parallel Test Sites

The machine supports up to eight parallel test stations, depending on the installed configuration.

Parallel testing can increase production capacity by allowing several devices to be tested during the same cycle. The available number of test sites must be verified on each used machine because configurations may differ.

Six-Sided Vision Inspection

The integrated vision system can inspect multiple surfaces of the device to identify appearance defects, orientation errors and package abnormalities before final packing.

Available inspection functions may depend on the installed cameras, lighting system, software version and optional modules.

Device Protection Options

Optional ASMPT technologies can support machine alignment, contact-force control and handling of thin or sensitive semiconductor packages.

When purchasing a used FT2018, the installed options should be checked according to the device thickness, contact requirements and production process.

Flexible Packing Configuration

Depending on the machine configuration, the FT2018 can support tape output, post-seal inspection, automatic replenishment and automatic reel-changing functions.

The tape width, pocket dimensions, reel specification and sealing requirements should be confirmed before shipment.

Suitable Applications

The ASMPT FT2018 is mainly used for testing, inspecting, sorting and packing small semiconductor devices, including:

• BGA packages

• SOT packages

• SOD packages

• SC packages

• DFN packages

• QFN packages

• SMA packages

• WLCSP devices

• Magnetic sensors

• Optical sensors

• Small integrated circuits

• Discrete semiconductor devices

The FT2018 is particularly suitable for manufacturers that require high-volume processing of devices between 1 × 1 mm² and 6 × 6 mm².

Why Source the FT2018 From Us?

We support customers sourcing used and refurbished semiconductor equipment for production expansion, equipment replacement and spare-machine preparation.

Our available services may include:

• Equipment sourcing

• Configuration verification

• Machine condition inspection

• Refurbishment coordination

• Machine photos and operating videos

• Spare-parts support

• Export packing

• International shipping

• Remote technical communication

All equipment specifications and installed options should be confirmed according to the actual machine before purchase.

Frequently Asked Questions

What device sizes can the ASMPT FT2018 handle?

The FT2018 is designed for semiconductor devices measuring approximately 1 × 1 mm² to 6 × 6 mm².

Device compatibility also depends on package thickness, shape, surface condition, nozzle configuration, contact requirements and the installed machine options.

How many test sites does the FT2018 support?

The ASMPT FT2018 can support up to eight parallel test stations.

However, not every used machine is equipped with all eight test sites. The installed test-site quantity should be verified from the actual machine configuration.

What is the maximum throughput of the FT2018?

ASMPT specifies a reference throughput of up to 50,000+ units per hour at a 30 ms test time.

Actual production throughput depends on test duration, device size, active test sites, inspection requirements, input method, output method and production settings.

Is every FT2018 machine configured the same way?

No. Used FT2018 machines may have different test-site quantities, tester interfaces, vision systems, software versions, tape modules and optional functions.

The complete configuration must be checked before quotation.

Is the machine supplied as used or refurbished?

The equipment can be supplied in used or refurbished condition, depending on current inventory and customer requirements.

The exact refurbishment scope should be defined before the order is confirmed.

What should be checked before purchasing a used FT2018?

Customers should confirm the machine year, serial number, test-site configuration, tester interface, vision functions, loading method, packing configuration, software version, electrical requirements and overall operating condition.

Request ASMPT FT2018 Availability

Looking for an ASMPT FT2018 automatic turret test handler?

Send us your device package, tester model, required test-site quantity, input and output configuration, destination country and preferred machine condition.

We will check the available equipment and provide the corresponding machine information, configuration details, photos and quotation.