EN
id
sk
sr
sv
it
pt
bn
ms
be
nl
fr
th
vi
ru
ja
ko
de
hy
az
bs
bg
my
cs
da
dv
el
et
fil
fi
ga
gl
gn
he
hi
km
hr
hu
is
kn
rw
lo
lv
lt
lb
lg
mi
mt
ne
no
ny
or
om
per
pl
ro
sa
so
es
sw
ta
tr
uk
ur
cy
xh
An ASM SIPLACE 2x8 feeder part number should never be treated as the complete purchasing specification. A feeder quotation may show a familiar reference while omitting the revision suffix, feeder family, sensor-related configuration, physical condition, actual machine compatibility or the functional status of the supplied unit.
For buyers searching for an ASM 2x8 feeder, SIPLACE 2x8 feeder, 00141269 feeder, 00141289 feeder, 00141479 feeder or 00141499 feeder, the key question is not only whether the quoted number appears correct. The real question is whether the exact feeder version, revision suffix, machine family, interface and tape-delivery condition match the production line where it will be installed.
This guide explains how to verify ASM SIPLACE 2x8 feeder references before purchase, replacement, shipment or production release.
In Brief: What Should Be Verified Before Ordering an ASM SIPLACE 2x8 Feeder?
Before ordering an ASM SIPLACE 2x8 feeder, verify the complete part number, revision suffix, feeder family, target placement-machine model, mechanical interface, lane configuration, tape path, connector area, sensor-related hardware where applicable and functional feed-test status.
Do not approve a feeder from a base part number alone.
Do not assume all 2x8 feeders are interchangeable across ASM SIPLACE machine generations.
Do not assume a feeder is Xi-compatible because it resembles an X feeder externally.
Do not treat a clean feeder as production-ready without controlled tape-feed testing.
Why a 2x8 Feeder Is More Than an 8mm Feeder
A 2x8 feeder is designed around a dual-lane component supply arrangement. That makes its setup more specific than a standard single-lane 8mm feeder. The machine must recognize the feeder correctly, each tape lane must guide and advance consistently, and the program must match the component source and pickup sequence.
For this reason, a feeder can physically appear complete while still being unsuitable for a target line if the interface, lane configuration, connector arrangement, feeder family or installed machine software does not match the intended production environment.
Verification principle: Confirm the complete feeder identity and real machine relationship before confirming compatibility.
2x8 Feeder References That Require Full Verification
| Part Number Group | Reference Numbers | What Must Be Confirmed Before Purchase |
|---|---|---|
| 2x8 High-Speed Feeder References | 00141269, 00141289 | Complete suffix, feeder family, target machine, dual-lane feed condition, connector and functional tape advance. |
| 2x8 X / Xi-Related References | 00141479, 00141499 | Exact visible suffix, X or Xi-related configuration, machine platform, installed interface and supplier test evidence. |
| Used or Refurbished Feeder Offers | Any of the above references | Housing, latch, sprocket movement, tape path, cover tape route, connector condition and functional feed test. |
Why Revision Suffixes Matter
ASM feeder references are often quoted with a base number only. However, a visible revision suffix can identify a specific version, production revision, installed configuration or supplied variant. A buyer should request the complete reference exactly as displayed on the feeder label.
Do not approve a quotation that lists only 00141269 or 00141479 when the physical feeder label contains additional suffix information. The quotation, photos and shipment label should match.
Request These Before Approving a Quote
Clear close-up photo of the feeder part-number label
Full visible part number and suffix
Front and rear feeder photos
Dual-lane tape path and sprocket-area photos
Connector, latch and feeder interface photos
Sensor-related module photos where applicable
Target-machine compatibility confirmation
Controlled tape-feed test video or report
How to Verify an ASM 2x8 Feeder Before Purchase
1. Confirm the Full Feeder Label
Start with the visible part number, suffix and serial reference where available. The supplier should provide a current image of the actual feeder, not only a catalog image.
2. Confirm the Target Machine Family
Record the exact ASM SIPLACE machine model where the feeder will be installed. Do not approve a replacement based on feeder width alone. The target machine family, slot interface and feeder-recognition method must match.
3. Inspect Both Tape Lanes
Because a 2x8 feeder handles two lanes, both paths should be checked. Review the tape guides, sprocket areas, tape advance, component presentation positions and cover tape routing for each lane.
4. Confirm Mechanical Interface and Latch Condition
Inspect the housing, latch, connector and mounting surfaces. The feeder must seat securely in the machine and maintain a reliable physical and electrical interface during production.
5. Confirm Sensor-Related Hardware Where Claimed
If a feeder is quoted as sensor-equipped, splice-capable or configured with additional monitoring hardware, request close-up photos and functional evidence. Do not assume that a sensor feature is included based only on a supplier title.
6. Run a Controlled Tape Advance Test
A functional check should verify that both tape lanes advance smoothly, pockets arrive at the expected pickup location and cover tape routing remains stable. A feeder can look clean but still show indexing or tape-path instability.
Seven Photos to Request Before Buying a 2x8 Feeder
Full feeder front view
Full feeder rear view
Part-number label with complete suffix
Lane one tape path and sprocket area
Lane two tape path and sprocket area
Connector and latch area
Sensor-related module or cable area where applicable
Common 2x8 Feeder Identification Mistakes
Mistake 1: Matching Only the First Part of the Number
A base reference is not always enough to identify the exact offered feeder. Confirm the visible suffix and compare it with the target replacement requirement.
Mistake 2: Treating X and Xi as Automatic Equivalents
Feeder family, machine generation, interface and configuration must be confirmed from the physical unit and target production environment.
Mistake 3: Checking Only One Tape Lane
A dual-lane feeder can appear functional on one lane while the second lane has tape-guide, sprocket, cover tape or indexing issues.
Mistake 4: Skipping Machine Recognition and Feed Testing
Correct appearance does not prove that the feeder will be recognized correctly or present components consistently in production.
Related 2x8 Feeder Resources
Frequently Asked Questions About ASM SIPLACE 2x8 Feeder Part Numbers
Can I buy an ASM 2x8 feeder based only on the base part number?
No. Confirm the complete part number, revision suffix, target machine family, physical interface, lane configuration and functional test status before purchase.
Does 2x8 mean that any ASM 2x8 feeder is interchangeable?
No. The lane configuration does not prove direct compatibility. The feeder family, machine platform, interface, connector arrangement and physical configuration must also be verified.
Why should both tape lanes be tested?
Each lane has its own tape delivery path and may show different indexing, tape guide, cover tape or component-presentation behavior.
What is the fastest way to verify a 2x8 feeder quotation?
Compare the complete feeder label, current physical photos, target machine model, lane configuration and controlled tape-feed result before approving payment or shipment.
Can a used 2x8 feeder look clean but still fail in production?
Yes. Tape-path wear, lane-specific indexing issues, cover tape problems, latch wear, connector faults or recognition problems may not be visible in a basic product photo.
Need Help Verifying an ASM SIPLACE 2x8 Feeder?
Share the complete feeder part number, visible suffix, target machine model, feeder photos and required production configuration. A useful review should verify the actual feeder identity before a purchase or replacement is approved.
