What should be checked first on a used BESI DATACON 2200 evo?

Start by confirming the exact machine version, serial-number configuration, installed process modules, available tooling, controller condition, vision system, handling setup and any documented maintenance or calibration history.

Is exterior cleaning enough for DATACON 2200 evo refurbishment?

No. Cosmetic cleaning does not confirm production readiness. A useful refurbishment scope should address mechanical condition, motion systems, bond heads, tooling, vision calibration, controller recovery, safety functions and functional verification.

How should a DATACON 2200 evo bond head be inspected?

Review bond head movement, force-control capability, tool holder condition, rotation or heating options where installed, axis response, available tools, nozzle condition and calibration evidence relevant to the intended process.

Why is vision calibration important on a used die bonder?

Vision systems affect die recognition, alignment, placement verification and process repeatability. Cameras, optics, illumination, image processing, calibration references and alignment performance should be checked before qualification.

What should a Factory Acceptance Test include?

A useful FAT can include power-on and safety checks, axis homing, bond head movement, camera and alignment verification, handling-module checks, tooling review, controller backup confirmation and a representative placement or process test when materials are available.

Can a DATACON 2200 evo be qualified without the original tooling?

It may be possible, but qualification depends on whether compatible nozzles, fixtures, eject tools, substrates, wafer handling and process-specific accessories can be sourced or developed for the required package route.

What software information should be requested before purchase?

Request information about controller hardware, industrial PC condition, operating software, enabled options, backup files, recovery media, machine data, alarms, documentation and access needed for future service or restoration.

What information should be prepared before requesting a refurbishment review?

Provide machine photos, serial information, known configuration, package drawing, die size, material route, wafer or substrate format, target output, available tooling and the intended installation location.

Uvavanyo lweZixhobo zeSemiconductor ezisetyenzisiweyo

Isikhokelo soHlolo lwe-BESI DATACON 2200 evo Refurbishment kunye ne-Used Die Bonder

I-BESI DATACON 2200 evo esetyenzisiweyo kufuneka ivavanywe njengenkqubo epheleleyo yemveliso kunokuba ibe yi-nameplate yomatshini. Imeko yeqonga loomatshini, iintloko zebhondi, inkqubo yombono, ukuphathwa kwe-wafer, imeko yesoftware, iphakheji yezixhobo kunye nembali yokulinganisa zinokuchaphazela kakhulu ukulungela ukufakwa kunye nokufaneleka kwenkqubo.

Esi sikhokelo sichaza indlela yokuphonononga i-DATACON 2200 evo ngaphambi kokuba ithengwe, ihlaziywe, ithunyelwe kwaye inyuswe imveliso. Yenzelwe amaqela obunjineli kunye nokuthengwa kwezixhobo zokubopha ezisetyenzisiweyo okanye ezihlaziyiweyo.

Uvavanyo loomatshini Uhlengahlengiso kunye nokuCwangciswa kwe-FAT Uhlolo lweeMfanelo zeMveliso

Ukubonisana kwi-Intanethi Cela Iinkcukacha zoHlolo

Yabelana ngoqwalaselo lomatshini, iifoto ezikhoyo, ulwazi olulandelelanayo, indlela yephakheji kunye neemeko zemveliso ezilindelekileyo ukuze uphonononge uhlolo oluluncedo ngakumbi.

Used BESI DATACON 2200 evo die bonder refurbishment and inspection environment

Ukuhlolwa Ngaphambi Kokuthunyelwa Ukuhlaziywa kufuneka kuquke ukuqinisekiswa kokusebenza, kungekuphela nje ukucoca ngaphandle.

Uvavanyo lweZixhobo ezisetyenzisiweyo Inspection of semiconductor die bonder mechanical and vision systems

Kutheni Ukuhlolwa Kubalulekile

Ukuhlaziya Ubuhle Akufani Nokuhlaziya Okulungele Imveliso

I-DATACON 2200 evo ingabonakala icocekile kwaye iphelele ngelixa isafuna ukusebenza kwiinkqubo zokuhamba, iintloko zebhondi, ukulungelelaniswa kwekhamera, izixhobo ezingasebenziyo, ukuphathwa kwe-wafer, izixhobo zokulawula, ukubuyiswa kwesoftware okanye izixhobo ezithile zenkqubo.

Kwizixhobo zokubopha ezisetyenzisiweyo, injongo yokwenyani ayikokuvula nje umatshini. Kukuqinisekisa ukuba uqwalaselo olunikezelwayo lunokubuyiselwa, luqinisekiswe kwaye lufanelekele indlela yephakheji ecetywayo phantsi kweemeko zemveliso ezichaziweyo.

Umgaqo wokuhlaziya osebenzayo

Imeko yoomatshini, ukuphindaphindwa kombono, ukufumaneka kwezixhobo, ubungqina bokulinganisa kunye novavanyo lokwamkelwa olubhaliweyo zibaluleke ngaphezu kwengxelo eqhelekileyo yokuba umatshini "uyasebenza."

Hlola ii-DATACON 2200 evo Platform Variants Hlola iiNdidi zeDie Bonder

Ububanzi boHlaziyo

Yintoni Efanele Iquke i-DATACON 2200 evo Refurbishment Scope?

Isicwangciso sokuhlaziya esiluncedo kufuneka sichaze iindawo ezisebenzayo ezihlolwayo, ezilungiswayo, ezilinganiswayo okanye ezitshintshwayo. Ububanzi kufuneka bubhalwe phantsi ngokuchasene noyilo lomatshini lokwenyani endaweni yokukopishwa kuluhlu lokuhlola oluqhelekileyo lwe-die bonder.

Ububanzi kufuneka buhambelane neyunithi ebonelelwayo.

I-base evo, evo plus, hF, hS kunye noqwalaselo oluphambili zinokusebenzisa iimodyuli zenkqubo ezahlukeneyo, iinkqubo zamandla, iipakeji zombono kunye neendlela zokuphatha.

Ukubuyiselwa koomatshini

Hlola isakhelo, iikhava, ii-axes, iibheringi, izinto zokuqhuba, indlela yokuhambisa intambo, imeko yokuthambisa, izibophelelo, iindawo zokuvala ukhuseleko kunye neepaneli zokufikelela.

Ulungelelwaniso lweNtshukumo

Qinisekisa ukuhamba kwesigaba, ukubuyela ekhaya, impendulo ye-encoder, ukuphindaphindeka, indlela yokuziphatha yokungcangcazela, ukulungelelaniswa kwe-gantry kunye nemeko yezixhobo zokuhamba ngokuchanekileyo.

Intloko yeBond kunye neZixhobo

Hlaziya iintloko zebhondi, iinkqubo zamandla, amandla okujikeleza, izixhobo ezifudunyezwayo, ii-nozzles, izixhobo zokukhupha, izixhobo zokukhetha nokubeka, izixhobo ezifakelweyo kunye neemodyuli zokutshintsha izixhobo.

Ukulinganisa Umbono

Jonga imeko yekhamera, i-optics, ukukhanya, ukugxila, ukucutshungulwa komfanekiso, impendulo yokulungelelanisa, izinto ezisetyenzisiweyo zokulinganisa kunye nazo naziphi na iimodyuli zokuhlola inkqubo.

Ukubuyiselwa kolawulo

Hlaziya isilawuli, ikhompyutha yemizi-mveliso, amakhadi entshukumo, i-I/O, indawo yesoftware, imidiya yokubuyisela, iinketho ezivunyiweyo, izixhobo zonxibelelwano kunye nee-backups.

Ulandelelwano loVavanyo

Ukuhlolwa Okubalulekileyo Okusixhenxe koMshini we-evo we-BESI DATACON 2200 osetyenzisiweyo

Olu landelelwano lungezantsi lwahlula uvavanyo lobunjineli olusebenzayo kuvavanyo olubonakalayo olusisiseko. Isigaba ngasinye kufuneka sibhalwe phantsi ngokuchasene noqwalaselo lwenombolo yeserial kunye neemodyuli zenkqubo ezifakiweyo.

Qala ngokubona ukuba umatshini ungubani.

Ukungalingani koqwalaselo yenye yezona ngozi zinkulu ekuthengweni kwezixhobo ze-semiconductor ezisetyenzisiweyo.

Qinisekisa inguqulelo echanekileyo

Qinisekisa ukuba umatshini yi-DATACON 2200 evo, evo plus, hF, hS okanye uqwalaselo oluphambili, kubandakanya ukuveliswa kwemveliso kunye neerekhodi zeenombolo ze-serial.

Hlola iPlatform yoMatshini

Jonga imeko yesakhelo, izigqubuthelo, uhambo lweqonga, iireyili zokuhamba, iibheringi, iintambo zekhebula, iingcango zokungena, izixhobo zokhuseleko kunye nobungqina bokuguguleka okungaqhelekanga.

Uphononongo lweeBond Heads

Qinisekisa iintloko zebhondi ezifakiweyo, uluhlu lwamandla, amandla okufudumeza, ukujikeleza, imeko yesibambi sesixhobo, intshukumo ye-axis, izixhobo ezingasebenziyo kunye nezixhobo zokulinganisa ezikhoyo.

Qinisekisa iNkqubo yoMbono

Hlola iikhamera, i-optics, ukukhanya, ukugxila, umgangatho womfanekiso, ukulungelelaniswa okuphindaphindiweyo, ukulinganiswa kwekhamera kunye nayo nayiphi na i-hardware yokuhlolwa emva kokubekwa.

Jonga ukuphathwa kwezinto

Qinisekisa i-wafer, itreyi, i-Gel-Pak®, i-feeder, i-carrier, i-substrate, i-leadframe okanye iimodyuli zokuphatha izixhobo ezifunekayo kwindlela yenkqubo ecetywayo.

Ulawulo lokuHlola kunye neSoftware

Jonga izixhobo zokulawula, imeko yePC, amakhadi entshukumo, i-I/O, isoftware yesicelo, imeko yokhetho, ii-alamu, iifayile zogcino kunye nemidiya yokubuyisela.

Chaza uvavanyo lokwamkelwa

Vumelanani ngeesampulu zezinto eziphathekayo, ulandelelwano lovavanyo, ulindelo lwemveliso, iikhrayitheriya zokubekwa, ukujonga okubonakalayo, iimfuno zoxwebhu kunye neemeko zokukhululwa kokuthunyelwa.

Factory acceptance test setup for refurbished semiconductor die bonding machine

Izixhobo, Umbono kunye nokulungela inkqubo

Umatshini oNikiweyo kufuneka uhambelane nomzila wephakheji ocetywayo

Nokuba iqonga eliphambili le-DATACON likwimeko entle, izixhobo ezingekhoyo okanye iimodyuli zenkqubo ezingaxhaswayo zinokulibazisa ukufaneleka. Indlela yemveliso kufuneka ihlolwe ngaphambi kokuthunyelwa, hayi emva kokufakwa.

Ubungakanani besidi, ubukhulu, indlela yokuthatha kunye nemeko yomqolo
Isakhelo sewafer, itreyi, iGel-Pak®, ifomathi yefeeder, yecarrier okanye yesubstrate
I-Epoxy, i-stamping, i-soldering, i-thermo-compression okanye enye indlela yenkqubo
Imfuneko yamandla ebhondi, imfuneko yezixhobo ezishushu kunye nolandelelwano lokuphathwa kwezinto
Inkangeleko yekhamera, icebo lokulungelelanisa kunye nendlela yokuqinisekisa inkqubo
Ii-nozzles, izixhobo, iireferensi zokulinganisa kunye nokufumaneka kwezixhobo

Uvavanyo lokwamkelwa kwefektri

Uluhlu olucetyiswayo lwe-FAT lwe-evo ehlaziyiweyo ye-DATACON 2200

Uvavanyo lokwamkelwa kwefektri kufuneka luqinisekise umatshini onikezelwayo ngokuchasene nomlinganiselo wokuhlolwa okuvunyelwene ngawo. Akufanele luxhomekeke kuphela kwividiyo yomatshini osebenza okanye ohamba kumjikelo ongafakwanga.

Uvavanyo ngokweekhrayitheriya ezichaziweyo.

Iikhrayitheriya zokwamkelwa kufuneka zibonise iphakheji ecwangcisiweyo, indlela yezinto ezisetyenziswayo, izixhobo ezikhoyo kunye nomsebenzi wemveliso olindelekileyo.

Ukuqinisekiswa kokuvula nokhuseleko	Jonga umbane oyintloko, iindawo zokuma ezingxamisekileyo, iingcango zokhuseleko, ii-interlocks, ii-alamu, uqhagamshelo lwezixhobo, imeko yekhabhinethi kunye nolandelelwano lokuqalisa komatshini.
Ukujonga Ukuhamba kwe-Axis kunye neNtshukumo	Qinisekisa ukubuyela ekhaya, ukuhamba nge-axis, ukuhamba kakuhle, ukugudiseka kwentshukumo, ukuphindaphindeka, ukungcangcazela okungaqhelekanga, ukuhanjiswa kwentambo kunye nokuphendula kwentshukumo phantsi kwenkqubo yovavanyo echaziweyo.
Intloko yeBond kunye nokujonga izixhobo	Qinisekisa ukuhamba kwentloko yebhondi efakiweyo, imeko yesibambi sesixhobo, izixhobo zokukhetha nokubeka, izixhobo zokukhupha, ukufakwa kwemilomo, impendulo yokulawula amandla kunye nokusebenza kokutshintsha izixhobo apho kufanelekileyo.
Uvavanyo loMbono kunye noLungelelaniso	Jonga umgangatho womfanekiso wekhamera, ukukhanya, i-autofocus apho ifakiwe khona, imisebenzi yokulungelelanisa, imeko yokulinganisa, ukucutshungulwa komfanekiso kunye nokuphindaphindwa kweethagethi ezimeleyo.
Ukuphathwa kweWafer kunye neSubstrate	Qinisekisa i-wafer, itreyi, i-carrier, i-feeder, i-leadframe, i-substrate okanye iimodyuli ze-fixture ezifakwe kumatshini onikiweyo kwaye ziyimfuneko kwinkqubo ecwangcisiweyo.
Uvavanyo lwezinto kunye nokubekwa	Xa izixhobo zesampulu kunye nezixhobo zifumaneka, qinisekisa ukuqokelelwa, ukulungelelaniswa, ukubekwa, ulandelelwano lwenkqubo kunye nokuziphatha okusisiseko kwemveliso ngokuchasene neemeko zokwamkelwa ezivunyiweyo.
Ugcino lweSoftware kunye nokuBuyisa	Qinisekisa isoftware yokusebenza, idatha yomatshini, iinketho ezivunyiweyo, iikopi zedatha, imidiya yokubuyisela, amaxwebhu kunye nokufikelela okufumanekayo okufunekayo kumsebenzi wenkonzo yexesha elizayo.
Uluhlu loqwalaselo kunye neZixhobo	Bhala phantsi iimodyuli ezifakiweyo, izixhobo, izixhobo, ii-nozzles, ii-feeders, i-process hardware, iindawo ezingasetyenziswayo, iincwadana zemiyalelo kunye nazo naziphi na izixhobo ezingafakwanga ngaphambi kokuba zithunyelwe.

Ukulungela ukufakwa kunye neeMfanelo

Lungisa Indawo Yokuvelisa Ngaphambi Kokuba Umatshini Ufike

Iprojekthi yezixhobo ezisetyenzisiweyo ephumeleleyo ifuna ucwangciso olungaphaya komatshini ngokwawo. Ukufakelwa, izixhobo zokusebenza, izixhobo zokusebenza, ukubhalwa kwamaxwebhu kunye noxanduva lwenkxaso kufuneka lucaciswe ngaphambi kokuba luhanjiswe.

Ukufaneleka kuqala ngaphambi kokuthunyelwa.

Izixhobo ezingachazwanga, izixhobo ezingekhoyo okanye imiqathango yokwamkelwa engaphelelanga inokuguqula umatshini osebenzayo ube yiprojekthi yemveliso ebambezelekileyo.

Ucwangciso lweNdawo kunye neZixhobo zoNcedo

Qinisekisa indawo efunekayo, umthwalo womgangatho, umbane, umoya ocinezelweyo, i-vacuum, i-exhaust, ukufikelela kwinethiwekhi, iimeko zokusingqongileyo kunye neemfuno zegumbi lokucoca apho kufanelekileyo.

Isicwangciso seNkqubo kunye neZixhobo

Lungisa iidayi, ii-wafers, ii-substrates, izixhobo, ii-nozzles, izixhobo, iireferensi zokulinganisa, izinto ezisetyenziswayo kunye nazo naziphi na izixhobo ezithile ezifunekayo ukuze kufunyanwe iziqinisekiso.

Isicwangciso seNkxaso kunye neSicwangciso seNxalenye eNcinci

Cacisa ii-backups zesoftware, iindawo eziphambili zokuncedisa, iincwadi zemiyalelo ezikhoyo, ubunini benkonzo, iimfuno zoqeqesho, uxanduva lokulinganisa kunye nenkxaso yokusombulula iingxaki emva kokufakwa.

Xa i-DATACON 2200 evo ehlaziyiweyo ifanelekile ukuphononongwa

I-DATACON 2200 evo ehlaziyiweyo inokuba lukhetho olusebenzayo xa ubunikazi bomatshini, iimodyuli zenkqubo, imeko kunye nobubanzi bokwamkelwa zihambelana nendlela yokuvelisa i-die attach okanye ii-multi-chip.

Imodeli echanekileyo, inguqulelo kunye neemodyuli ezifakiweyo zibhaliwe.
Iintloko zebhondi ezifunekayo, uluhlu lwamandla, iphakheji yokubona kunye neemodyuli zokuphatha ziyafumaneka.
Izixhobo ezithile zenkqubo, ii-nozzles, izixhobo kunye neereferensi zokulinganisa zinokubonelelwa okanye zifunyanwe.
Uvavanyo olusebenzayo okanye uvavanyo lwesampulu lunokwenziwa ngaphambi kokuba luthunyelwe.
Ukufakwa, ukubuyiswa kwesoftware, ukufikelela kwizixhobo ezingasetyenziswanga kunye noxanduva lwenkxaso kuyachazwa.

Ixesha lokuma ngaphambi kokuba uthenge

Umatshini akufuneki uvunywe kuphela kuba uvula okanye uphethe i-nameplate ye-DATACON echanekileyo. Iinkcukacha zoqwalaselo ezingekhoyo okanye iinkqubo ezingaqinisekiswanga ezibalulekileyo zenkqubo zinokubangela ukulibaziseka kweziqinisekiso ezibizayo.

Le yunithi inikezelwayo ayinalo uluhlu oluthembekileyo loqwalaselo, ulwazi olulandelelanayo okanye ingxelo yemeko yakutshanje.
Izixhobo ezifunekayo, iimodyuli zokuphatha, ii-feeders, izixhobo okanye izixhobo zenkqubo azikho.
Umbono, intshukumo, intloko yebhondi okanye umsebenzi wolawulo awunakubonakaliswa.
Isoftware yomatshini, imidiya yokubuyisela idatha, iinketho okanye amaxwebhu obuchwephesha azifumaneki.
Iikhrayitheriya zokwamkelwa, iimfuno zokufakelwa, iindawo ezingasetyenziswayo kunye nobubanzi benkxaso azikacaciswa.

Imibuzo yokuhlaziya nokuhlola

Imibuzo ebuzwa rhoqo malunga nokuhlaziywa kwe-BESI DATACON 2200 evo

Le mibuzo igxile ekuhlolweni kwezixhobo ezisetyenzisiweyo, ukulinganiswa, uvavanyo olusebenzayo kunye nocwangciso lweziqinisekiso endaweni yokukhethwa kweqonga le-evo le-DATACON 2200 ngokubanzi.

Yintoni ekufuneka ihlolwe kuqala kwi-evo ye-BESI DATACON 2200 evo esetyenzisiweyo?

Qala ngokuqinisekisa inguqulelo echanekileyo yomatshini, uqwalaselo lweenombolo zeserial, iimodyuli zenkqubo ezifakiweyo, izixhobo ezikhoyo, imeko yomlawuli, inkqubo yombono, ukuseta kokuphatha kunye nayo nayiphi na imbali yokugcinwa okanye yokulinganisa ebhaliweyo.

Ngaba ukucoca ngaphandle kwanele ukuhlaziya i-DATACON 2200 evo?

Hayi. Ukucocwa kwezinto zobuhle akuqinisekisi ukulungela imveliso. Isikali sokuhlaziya esiluncedo kufuneka sijongane nemeko yoomatshini, iinkqubo zokuhamba, iintloko zebhondi, izixhobo, ukulinganiswa kombono, ukubuyiselwa kolawulo, imisebenzi yokhuseleko kunye nokuqinisekiswa kokusebenza.

Intloko yebhondi ye-DATACON 2200 evo kufuneka ihlolwe njani?

Hlola intshukumo yentloko yebhondi, amandla okulawula amandla, imeko yesibambi sesixhobo, iindlela zokujikeleza okanye zokufudumeza apho zifakiweyo, impendulo ye-axis, izixhobo ezikhoyo, imeko ye-nozzle kunye nobungqina bokulinganisa obuhambelana nenkqubo ekujoliswe kuyo.

Kutheni kubalulekile ukulinganisa umbono kwi-die bond esetyenzisiweyo?

Iinkqubo zokubona zichaphazela ukuqondwa kweedayi, ukulungelelaniswa, ukuqinisekiswa kokubekwa kunye nokuphindaphinda kwenkqubo. Iikhamera, i-optics, ukukhanya, ukucutshungulwa kwemifanekiso, iireferensi zokulinganisa kunye nokusebenza kokulungelelaniswa kufuneka kuhlolwe ngaphambi kokuqinisekiswa.

Yintoni ekufuneka iquke kuvavanyo lokwamkelwa kwefektri?

I-FAT eluncedo ingabandakanya ukujonga amandla kunye nokuhlolwa kokhuseleko, ukujikeleza kwe-axis, ukuhamba kwentloko yebhondi, ukuqinisekiswa kwekhamera kunye nokulungelelaniswa, ukujonga imodyuli yokuphatha, uphononongo lwezixhobo, ukuqinisekiswa kwe-backup yomlawuli kunye novavanyo lokubeka okanye inkqubo emeleyo xa izixhobo zifumaneka.

Ngaba i-DATACON 2200 evo ingafaneleka ngaphandle kwesixhobo sokuqala?

Kusenokwenzeka ukuba kunjalo, kodwa isiqinisekiso sixhomekeke ekubeni ii-nozzles ezihambelanayo, izixhobo zokufaka izinto, izixhobo zokukhupha izinto, ii-substrates, ukuphathwa kwe-wafer kunye nezixhobo ezithile zenkqubo zinokufunyanwa okanye ziphuhliswe na ukuze kusetyenziswe indlela efunekayo yepakeji.

Loluphi ulwazi lwesoftware ekufuneka lucelwe ngaphambi kokuba uthenge?

Cela ulwazi malunga nehardware yomlawuli, imeko yePC yemizi-mveliso, isoftware yokusebenza, ukhetho olusebenzayo, iifayile zogcino, imidiya yokubuyisela, idatha yomatshini, ii-alamu, amaxwebhu kunye nokufikelela okufunekayo kwinkonzo okanye ukubuyiselwa kwixesha elizayo.

Loluphi ulwazi olufanele lulungiswe ngaphambi kokuba kucelwe uphononongo lokulungiswa kwakhona?

Nika iifoto zomatshini, ulwazi olulandelelanayo, uqwalaselo olwaziwayo, umzobo wephakheji, ubungakanani bedayi, indlela yezinto, ifomathi ye-wafer okanye ye-substrate, imveliso ekujoliswe kuyo, izixhobo ezikhoyo kunye nendawo ekucwangciselwe ukufakwa kuyo.

Ngaba ufuna uhlolo lwe-DATACON 2200 evo okanye uphononongo lokuhlaziya?

Yabelana ngeefoto zomatshini ezikhoyo, iinkcukacha zolandelelwano, uqwalaselo lwangoku, indlela yenkqubo eceliweyo kunye neemeko zemveliso ezilindelekileyo. Oku kwenza kube nokwenzeka ukuchaza uhlolo oluluncedo ngakumbi, i-FAT kunye nobubanzi bokuhlaziya ngaphambi kokuthenga okanye ukuthunyelwa.

Ukubonisana kwi-Intanethi