Is the ASM SIPLACE CA2 an SMT machine or a die bonder?

The ASM SIPLACE CA2 is a hybrid placement machine that combines feeder-based SMT component placement with direct-from-wafer die attach and flip-chip processing.

Why not use a conventional SMT machine for bare dies?

Direct wafer processing requires wafer-map data, die separation, ejector and flip functions, die buffering, specialized inspection and die-level traceability beyond normal feeder-based placement.

Can the SIPLACE CA2 process SMDs and bare dies on the same substrate?

Yes. The platform is designed to place feeder-supplied SMD components and bare dies taken directly from sawn wafers within one coordinated production flow.

Does direct wafer pickup eliminate die taping?

It can eliminate the need to convert applicable dies into tape before placement, subject to wafer format, die condition, known-good-die data and the installed wafer configuration.

How does the SIPLACE CA2 maintain speed when picking dies from a wafer?

The platform uses die buffering and parallelized preparation so dies can be detached and prepared while other placement operations continue.

What is the maximum published placement performance of the SIPLACE CA2?

Published platform values reach up to 76,000 components per hour for SMT placement, 54,000 dies per hour for die attach from wafer and 51,000 dies per hour for flip-chip placement.

Can one SIPLACE CA2 setup use several different wafer types?

With the applicable wafer exchange configuration, the platform can hold up to 50 different wafers for multi-die production.

What does single-die-level traceability mean?

It means an individual die can be linked from its pickup position on the source wafer to its final placement position on the substrate together with relevant production data.

Can the SIPLACE CA2 replace every dedicated die bonder?

No. Processes requiring specialized bonding force, heating, curing, dispensing or unsupported die formats may still require dedicated semiconductor assembly equipment.

Can the SIPLACE CA2 be used with a SIPLACE TX micron?

Yes. The machines can be arranged in the same SiP production line to balance feeder placement with direct-wafer and hybrid placement operations.

What information is needed to match a used SIPLACE CA2 machine?

Provide the die and wafer specifications, substrate dimensions, required accuracy, component range, target output, conveyor preference, process options, machine condition and destination.

Te Whakatakotoranga Wafer-Tika mō te Tākai Matatau

ASM SIPLACE CA2Otinga Whakaputa Mate Tāpiri me te Maramara-Pāwhiri

I whakawhanakehia te SIPLACE CA2 mō ngā hua kāore e uru pai ki roto i te raina SMT tuku iho, ki roto rānei i te tukanga here-mate tūkotahi. Ka whakakotahi i te whakatakotoranga SMD e ahu mai ana i te whāngai me te kohikohi tika i ngā mate haurua-ira mai i ngā anga whakairo, e āhei ai a SiP me ngā kaihanga tākai matatau ki te whakahaere i ngā wāhanga whakauru, te tāpiri mate, te whakatakotoranga maramara-hurihuri, te tirotiro me te whai i roto i te tūāpapa whakaputa hono kotahi.

Tirohia te Taurite o te Tukanga Matapakihia te Whirihoranga CA2

Tae atu ki te 76,000 cphTe Whakanohonga SMT e Hangai ana ki te Whāngai

Tae atu ki te 54,000 cphMate Tāpiri mai i te Wafer

Tae atu ki te 51,000 cphMaramara-Whakawhiti mai i te Wafer

Ki raro ki te 10 µmAkomanga Tika i te 3 Sigma

Te Raru Hanga

He aha i noho ai te SIPLACE CA2

He maha ngā wā ka whakakotahihia e ngā kōwae Pūnaha-i-roto-i-te-Mōkihi me ētahi atu hua hiko matatau ngā whānau rauemi rerekē e rua ki runga i te papa kotahi: ngā wāhanga SMD tuku iho e tukuna ana i roto i ngā rīra, me ngā mate haurua-kore-whakauru e tukuna ana i runga i ngā papa rakau. Mā te hanga tuku iho ka wehea ēnei rauemi i waenga i te mīhini whakanoho SMT me te hononga mate.

Mā taua wehenga ka taea te whakauru i ētahi atu huringa rauemi, rokiroki takawaenga, whakawhiti hua, taiao hōtaka me ngā atanga aroturuki. Me whakawhiti pea ngā mate tahanga ki roto i te rīpene i mua i te urunga ki tētahi tukanga whāngai, i te mea ka neke ngā hua whakauru i waenga i ngā taputapu i hangaia kia rite ki ngā mātāpono whakaputa rerekē.

He tūāpapa whakanoho ranu te ASM SIPLACE CA2 i hangaia hei whakakī i tēnei āputa.Ka kawea mai e ia te whakahaere tika o te mate angiangi ki roto i te taiao whakaputa SMT, kia taea ai te whakarite i ngā wāhanga whāngai, te tāpiri mate me ngā mahi huri-maramara huri noa i te rere hua kotahi.

He aha ngā rerekētanga ina uru ngā mate ki te rārangi SMT?

Ka taea te tīpako tika i ngā mate pai e mōhiotia ana mai i ngā mōhiohio mahere-wafer.
Ka taea te whakatakoto i ngā SMD e tukuna ana e te whāngai me ngā mate e tukuna ana e te papa whakarewa ki runga i te papa kotahi.
Ka taea te whakataurite i te whakarite me te whakatakotoranga o te mate mā te whakamahi i te pūnaha ārai mate.
Ka taea te hono i ia mate mai i tōna tūranga angiangi ki tōna tūranga papa whakamutunga.
Ka taea e ngā atanga whakawhitiwhiti SMT me te semiconductor te whai wāhi ki te rere honohono kotahi o te wheketere.

Whakatau Tukanga

Āhea ka whai tikanga te SIPLACE CA2?

Kāore ngā tono CA2 tino kaha e tautuhia ana e te ingoa kotahi o te mōkihi. E tautuhia ana ēnei e te huinga o te pūtake rauemi, te raupapa tukanga, te tika, te whai i ngā mea me te rahinga whakaputa.

✓

Te Whakauru Kaha CA2

E whakamahi ana te hua kotahi i ngā SMD e tukuna ana e te whāngai me ngā mate tahanga.
Me tango tika ngā mate mai i tētahi, i ētahi rānei o ngā anga angiangi kua kanihia.
Kei roto i te whakaputanga ko te tāpiri mate, te huri maramara, ngā tukanga e rua rānei.
Me whakarerekē ngā momo mate maha, kaua e nui te whakahaere ā-ringa.
Ko te whakatakotoranga e hiahiatia ana he akomanga tika 20 µm, 15 µm, 10 µm rānei.
Me whai i te āhua o te mate takitahi mai i te anga whakarewa ki te hua kua oti.
E hiahia ana te kaihanga ki te whakaiti i te tāpiri i ngā rīpene mate me ngā mahi whakahaere rauemi e pā ana.
Me hono te raina ki ngā pūnaha SMT me ngā pūnaha wheketere haurua-ira.

Me Arotake anō te Tukanga

Me whakamahi te tukanga i te whakamahana motuhake, te whakamaroke, te kaha piri nui rānei.
Kāore ngā rahinga, ngā matotoru rānei o te mate i te awhe whakahaere kua tāutahia.
Kāore anō kia tāutahia ki te mīhini ngā mahi tohatoha, here rānei mō te hua.
Me whai aratau kawe, aratau kawe rānei te papa, kāore i roto i te whirihoranga.
He iti rawa te rahinga whakaputa hei whakamana i tētahi tūāpapa tere-nui kua whakauruhia.
Ko te rere o te wheketere o nāianei e hangaia ana huri noa i ngā pūtau here-mate motuhake.
Me whakahaere te tirotiro, te ine rānei e hiahiatia ana i runga i ngā taputapu motuhake motuhake.
Kāore i te mīhini kua whakamahia ngā kōwhiringa wafer, pane, me ngā pūmanawa e tika ana.

Hanganga Mīhini

E rima ngā pūnaha e tautuhi ana i te kaha o te tukanga CA2

Ko te ingoa tauira e tohu ana i te tūāpapa, engari ko ēnei pūnaha kua tāutahia e whakatau ana me pēhea te tukatuka a tētahi mīhini i ngā anga, ngā wāhanga me ngā papa.

01 / TAUMATA WHAKATAKI

Ngā Whāngai me ngā Paepae SMT

Ka tukuna e ngā whāngai hototahi ngā mea korekore me ngā mea haurua-ā-ira kua tākaihia, ā, ka tautokohia e ngā kōwhiringa paepae me ngā kaikawe ētahi atu hōputu wāhanga.

02 / TE WHAKAHAERE I TE WAFERA

Pūnaha Whakawhiti Anga

Ka rongoa, ka whakaatu hoki te pūnaha angaanga i ngā momo angaanga maha, kia taea ai ngā hua kei roto he maha ngā momo mate tahanga.

03 / TUKANGA WHAKARĀRANGI

Te Pūwero

Ka taea te wehe me te whakarite i te mate i te wā e whakatakotoranga ana, ka whakaiti i te tere e pā ana ki te kohikohinga tika o te wafer.

04 / TE WHAKATŪNGA

Whirihoranga Upoko CP20

Ka taea e ngā pane tere-teitei te whakahaere i ngā wāhanga iti me ngā wāhanga tairongo me te hopu kore pa, te whakanoho whakahaere me ngā akomanga tika tae atu ki te 10 µm.

05 / TE WHAKAHAERE TUKANGA

Tirotiro me te Whai Aroturuki

Mā te pūoko wāhanga, te arowhai i te āhua o te mate, te tirotiro tō me ngā raraunga whakaputa ka tautoko i ngā rekoata hua pumau me te taumata mate.

Rere Huihuinga Ranu

Te Nekehanga o te Hua SMD me te Hua Bare-Die i roto i te CA2

Ka rerekē te raupapatanga tuturu i runga i te hua, engari ko te tikanga ka hono te tukanga i te tautuhi rauemi, te whakahaere tika i te anga, te whakatakotoranga tika me ngā rekoata whakaputa.

Utaina ngā Raraunga Hua

Kua whakaritea ngā kaupapa papa, ngā raraunga wāhanga, ngā mahere papa, ngā tawhā tukanga me ngā whakaritenga whai.

Whakaritea ngā Rauemi

Kua tohaina ngā rīra SMD, ngā paepae, ngā papa angiangi, ngā anga papa angiangi, ngā pūwero me ngā rauemi tōpana ki te whakatakotoranga whakaputa.

Kōwhiria ngā Mate Pai e Mōhiotia ana

Ka tautuhia e te pūnaha angaanga te angaanga e hiahiatia ana, ā, ka whakamahia ngā raraunga mahere hei tīpako i ngā mate e tika ana mō te hua.

Ngā Mate Pūwero me te Mate Orient

Ka wetekina ngā mate, ka tirotirohia, ka āraia, ka hurihia ina hiahiatia te hononga anga-ki-raro o te huihuinga.

Whakatakotoria ngā Wāhanga Whakaranu

Ka whakatakotoria ngā wāhanga whāngai me ngā mate wafer mā te whakamahi i te raupapa SMT, te tāpiri-mate, te huri-maramara, te tuku rānei kua tautuhia.

Tuhia ngā Raraunga Tukanga

Ka taea te hono i te pūtake kohi, te hua tirotiro me te tūranga whakatakotoranga whakamutunga ki te papa me te rekoata whakaputa.

Raraunga Pūhara Kua Whakaputaina

Ngā Whakatakotoranga Hangarau ASM SIPLACE CA2

Ko ngā uara kua whakaputaina e whakaahua ana i te kaha o te tūāpapa CA2 e wātea ana. Ko te mahi tuturu e whakawhirinaki ana ki te huinga pane kua tāutahia, te mōkihi tika, ngā kōwae wafer, te kaikawe, te ranunga wāhanga me ngā kōwhiringa tukatuka.

Taonga Hangarau	Pūkenga Whakaputaina	He aha te mea nui
Tere whakatakotoranga SMT	Tae atu ki te 76,000 ngā wāhanga ia hāora	Tautoko ana i te whakatakotoranga nui o ngā mea korekore e tukuna ana e te whāngai me ngā wāhanga kua tākaihia.
Tāpirihia te mate mai i te wafer	Tae atu ki te 54,000 ngā mate i ia hāora	Ka taea te whakatakotoranga tika o te anga angiangi me te kore he tukanga tāpiri takawaenga.
Te whakanoho maramara-hurihuri mai i te wafer	Tae atu ki te 51,000 ngā mate i ia hāora	Tautoko ana i te whakatakotoranga tere-teitei o ngā mate me te taha hononga e anga ana ki te papa.
Ngā akomanga tika	20 µm, 15 µm me te 10 µm i te 3 sigma	Ka āhei te taurite tukanga mō ngā rahi rerekē o te mate, ngā papa, ngā diameter pōro me ngā ātete papa.
Te kaha o te anga	Tae atu ki te 50 ngā momo wafers rerekē	E whakarato ana i te āheinga maha-mate mō ngā hua kei roto he maha ngā mahi haurua-ira.
Whakawhitinga angiangi	I raro iho i te 13 hēkona	Ka whakaiti i te whakaroa o te huringa rauemi i roto i ngā hua e tauwhitiwhiti ana i waenga i ngā pūtake papatahi maha.
Hōputu papa kotahi-ara	Tae atu ki te 620 × 700 mm, kei te whirihoranga te rahi	Tautoko ana i ngā panera, ngā PCB kua whakauruhia me ngā papa motuhake nui.
Hōputu papa-rua-ara	Tae atu ki te 375 × 260 mm i te aratau paerewa kua tohua	Tautoko ana i te kawe whakarara mō ngā PCB paerewa me ngā papa SiP.
Ngā rahinga mīhini	Tata ki te 2.56 × 2.50 × 1.85 m	He pūtake mō te whakamahere papa, te whakawātea urunga me te arotake i te tahora o te rārangi.
Ngā atanga whakawhitiwhiti kōrero	IPC-HERMES-9852, IPC-2591 CFX, IPC-SMEMA-9851 me SECS/GEM	Ka hono i te mīhini ki ngā pūnaha whakahaere raina SMT me ngā pūnaha wheketere haurua-ira.
Taiao whakaputa	Hototahi ki te rūma ma o te akomanga 7 me te tautoko SEMI S2/S8	Tautoko ana i te whakatinanatanga i roto i ngā wāhi whakaputa tākai matatau me ngā wāhi whakaputa haurua-ā-ira e whakahaerehia ana.

Me tirohia te mīhini e tukuna ana ki tōna ingoa, ngā pane kua tāutahia, te akomanga tika, te pūnaha anga, te whakaritenga kawe, ngā raihana pūmanawa me ngā kōwae tukatuka. Kāore ngā mōrahi o te papaaho e whakaahua aunoa i ia waeine takitahi.

Te Tika me te Kawe

Ngā Huringa Rahi o te Papa me te Akomanga Tika e Hiahiatia ana

Kāore e taea te whakamahi i te hōputu tautoko nui rawa atu me te tino tika mō te wāhi mahi kotahi. Me arotake tēnei hononga i mua i te whiriwhiri i tētahi mīhini.

Aratau Kawe / Mahi	Akomanga Tika	Hōputu Papa Whakaputaina	Pūtake Arotake Noa
Kaikawe kotahi-ara	20 µm @ 3 sigma	Tae atu ki te 620 × 700 mm	Ngā panera nunui me ngā whakatakotoranga papa-tāmau.
Kaikawe kotahi-ara	15 µm @ 3 sigma	Tae atu ki te 620 × 700 mm	Hōputu nui me ngā whakaritenga whakanoho kiato ake.
Aratau hauwhā kotahi-ara	12 µm @ 3 sigma	Tae atu ki te 620 × 700 mm, aromatawaitia e te hauwhā 300 × 300 mm	Whakaūtia te tahora o te hua e pā ana ki te wāhi mahi kua tohua.
Kaikawe kotahi-ara	10 µm @ 3 sigma	Tae atu ki te 300 × 300 mm	Ko te SiP tino tika me ngā tono mate piripono.
Kaikawe ara-rua	20 µm @ 3 sigma	Tae atu ki te 375 × 260 mm	Te hanga PCB paerewa whakarara, SiP rānei.
Aratau takirua hei ara kotahi	20 µm @ 3 sigma	Tae atu ki te 375 × 430 mm	Hōputu whānuitia mā te whakamahi i te tūāpapa kawe-rua.
Kaikawe ara-rua	15 µm, 10 µm rānei @ 3 sigma	Tae atu ki te 250 × 100 mm	Ngā papa iti e hiahia ana ki te akomanga tika ake.

Whakataurite i te Ara Whakaputa

E toru ngā huarahi hei whakakotahi i tētahi hua SMD me te hua Bare-Die whakaranu

Ko te CA2 tētahi o ngā hoahoa whakaputa pea. Ko te huarahi pai rawa atu ka whakawhirinaki ki te uaua o te hua, te rahinga, ngā taputapu o nāianei me ngā mahi tukanga e hiahiatia ana.

Ara A

Ngā Pūtau SMT me ngā Pūtau Here-Mate Wehewehe

Ka tukatukahia ngā wāhanga kua tākaihia me ngā mate tahanga i runga i ngā papaaho taputapu motuhake.

He whai hua ina whakamahia ngā mahi here-mate motuhake
Ka āhei te arotau motuhake i ngā taputapu
Me whakawhiti me te whai i ngā pūnaha katoa
Me nui ake te wāhi papa me te whakahaere waenga pea

Ara B

Tāpirihia ngā Mate ki te Rīpene hei Whakanoho i ngā Mea SMT

Ka hurihia ngā mate tahanga ki te hōputu rīpene hototahi ki te whāngai i mua i te huihuinga.

E whakamahi ana i te rere o ngā rauemi e ahu mai ana i te whāngai kua mōhiotia
Tāpirihia ngā mahi tāpiri, rokiroki me te whakahaere kounga
Ka waihanga i ngā whakaritenga mō ngā rauemi kawe me te whakakorenga
Tērā pea ka whakawhāiti i te ngāwari ina whakamahia he maha ngā momo mate

Ara C

Te Whakatakotoranga Ranu Wafer-Tika

Ka tukatukahia e te CA2 ngā SMD mai i ngā whāngai, ā, ka mate tika mai i ngā wafer i roto i te tūāpapa hono kotahi.

Ka whakaiti i te tahuritanga o te mate me te whakahaere waenga
Tautoko ana i te hanga maha-wafer me te maha-mate
Ka hono i ngā rekoata mate ki ngā tūranga whakanoho whakamutunga
Me tika te whirihoranga o te anga, te pane me te tukanga

Hanganga Raina Whakaputa

Ka taea e CA2 te mahi hei pokapū tukatuka ranu o te raina SiP

Mō te whakaputanga SiP nui ake te rahinga, ka taea te whakakotahi i te CA2 me te micron SIPLACE TX, me ētahi atu taputapu raina e tika ana. Kātahi ka taea te whakataurite i te whakatakotoranga whāngai tere-tiketike, te tukatuka wafer-tika me te tirotiro puta noa i ngā mīhini hono, kaua ki te akiaki i ia mahi ki te teihana kotahi.

Wāhanga 01Te Tānga, te Rauemi rānei

Ka pania te whakapiri konukō, te piripiri, te rere rānei, ā, ka tirotirohia kia rite ki te tukanga.

Wāhanga 02Te Whakatakotoranga SMD Tere-Tiketike

Ka taea te whakanoho i ngā wāhanga whāngai-kaha ki runga i tētahi tūāpapa tere-teitei taurite.

Wāhanga 03Te Whakatakotoranga Wafer me te Whakatakotoranga Ranu CA2

Kua oti ngā mate angiangi tika, ngā maramara huri me ngā mahi whakanoho-whakauru motuhake.

Taunga Taupānga

Ngā Hua e Whai Hua ana i te Whakatakotoranga Wafer-Tūturu me te Whakatakotoranga Wahanga-Whakaranu

Ko te CA2 te mea tino whai hua ina me whakarite ngā whakatakotoranga wāhanga maha me te tika teitei, te putanga teitei me ngā tuhinga rauemi taipitopito.

Ngā Kōwae Pūnaha-i-roto-i-te-Mōkihi

Ngā tukatuka, te mahara, ngā mate RF, ngā IC kua tākaihia me ngā kōpae kore mahi kua huihuia ki runga i tētahi papaaho kiato noa.

Ngā Huihuinga Ārahi Mana

Ko ngā mate hiko me ngā wāhanga SMD tautoko kua whakanohoia ki runga i ngā papa motuhake mō ngā pūnaha motuka me te pūngao.

Tākai Taumata-Whera

Te whakatakotoranga tika o te mate me ngā rerenga mahi maramara-ki-te-wafer e hiahia ana kia whakahaerehia te whakahaere wafer.

Tākai Taumata-Papa

Ngā panera whakatakotoranga-rahi me ngā hanganga tāmau e hiahia ana kia tika te kawe me te whakatakotoranga wāhanga.

Ngā Pūoko me ngā Kōwae Whakawhitiwhiti Kōrero

He hua kiato e whakakotahi ana i ngā mate pūoko tahanga, ngā mate RF rānei me ngā IC whakahaere me ngā wāhanga kore mahi.

Ngā Hua PCB Whakauru

Ngā mate tahanga kua whakauruhia ki roto, ki runga rānei i ngā hanganga ara iahiko tā matatau me ngā whakaritenga whakahaere motuhake.

Whakamāramatanga Whirihoranga

Ngā Wāhanga e Whā hei Tauwhāiti i mua i te Whakaōrite i tētahi Mīhini CA2

Ko te kōwhiringa pono ka tīmata i te hua me te tukanga e hiahiatia ana, kaua i te tauira mīhini anake.

Rauemi

Tautuhia ngā awhe o te mate, te matotoru, te whānui o te papa wafer, te whakatakotoranga mahere papa wafer, te whānuitanga o te mōkihi SMD, te whānui o te rīpene me te maha o ngā momo mate.

Te Tika me te Putanga

Whakaūtia te manawanui ki te whakatakotoranga, te pupuhi, te papa rānei o te pōro, te putanga ia haora e hiahiatia ana, te ranunga hua me te auau whakawhiti e tumanakohia ana.

Te Kawe i te Papatūānuku

Tauwhāitihia ngā ine o te papa, te matotoru, te piko, te hoahoa kawe, te rere o te ara kotahi, ara rua rānei, me te ahunga uta.

Whakahaere Tukanga

Tautuhia ngā whakaritenga mō te tuku, te tirotiro, te whai i te huarahi, te rūma ma, te whakawhitiwhiti kōrero ki te wheketere me te porowhita kati.

Manatoko Taputapu

Ngā Mea Me Tirohia i runga i te SIPLACE CA2 e Wātea ana

Ka taea e ngā mīhini e rua e mau ana i te ingoa tauira CA2 kotahi te tautoko i ngā tukanga rerekē. Me arotake te whirihoranga kua tāutahia katoa i mua i te whakatau utu, te nekehanga, te whakamahere raina rānei.

Tuakiri mīhiniTe ingoa katoa, te tau rangatū, te tau hanga, te pereti ingoa me te hītori whakahaere.

Ngā upoko whakanohoKua tāutahia ngā pane CP20, ngā tapanga pane, ngā hāora whakahaere, ngā atanga pūwero me ngā mōhiohio whakatikatika e wātea ana.

Akomanga tikaWhirihoranga 20 µm, 15 µm, 10 µm rānei, me te wāhi mahi whai tohu e rite ana.

Ngā taputapu angiangiWāhanga whakawhiti anga anga, ngā anga anga anga e tautokona ana, te pūwero, te arai, te wāhanga huri me te āheinga mahere-anga.

Pūnaha kaweHe ara kotahi, he ara rua, he ara maui-ki-roto/ara maui-ki-waho, he whakaritenga motuhake rānei mō ngā kawe me ngā paparanga.

Ngā kōwae tukangaTe waeine tōpana rārangi, te pūoko wāhanga, te tirotiro mate, te tirotiro i runga i te papa me ngā kōwhiringa whai.

Pūmanawa me ngā atangaPutanga pūmanawa kua tāutahia, ngā raihana, SECS/GEM, CFX, HERMES me te whakaurunga raraunga whakaputa.

Te whānuitanga o te tukuNgā whāngai, ngā pūwero, ngā taputapu wafer, ngā tuhinga, ngā wāhanga e manawapa ana, ngā mōhiohio whakamātautau me te tākai kaweake.

Tautoko Taputapu me ngā Wāhanga

Ngā Rauemi Taputapu e Pā Ana mō tētahi Kaupapa CA2

Me whakarite te kōwhiringa mīhini ki ngā whāngai e hiahiatia ana, ngā taputapu angiangi, ngā pane whakatakotoranga, ngā pūwero me te tukanga tākai matatau e karapoti ana.

Kāwai Taputapu

Taputapu Here Mate

Arotakehia ngā taputapu tāpiri-mate haurua-ira me ngā taputapu tākai matatau mō ngā whakaritenga tukanga rerekē.

Tūhurahia Ngā Bonders → Tuku Rauemi

Ngā Whāngai ASM SIPLACE

Tātaitia te whānui o te rīpene, te rahinga o te whāngai me ngā whakaritenga tuku wāhanga mō te taha SMT o te tukanga.

Tirohia ngā Whāngai ASM → Tautoko Whirihoranga

Te Taurite o te Mīhini me ngā Wāhanga CA2

Tukuna mai ngā whakaritenga mō te tukanga, te anga whakarewa, te mate, te papa me te tika mō te arotake i te mīhini me ngā wāhanga whakakapinga.

Kōrerohia tō Hiahia →

Pātai Auau

Ngā Pātai Tukanga me te Whirihoranga SIPLACE CA2

Ngā whakautu mā ngā tīma e aromatawai ana i te mīhini mō te whakatakotoranga anga-tika, te hanga SiP me te takai matatau.

He mīhini SMT te ASM SIPLACE CA2, he mīhini here mate rānei?

He mīhini whakanoho ranu tēnei. Ka whakakotahi i te whakanoho wāhanga SMT e ahu mai ana i te whāngai me te whakapiri tika mai i te mate wafer me te tukatuka maramara-hurihuri, kia mahi ai puta noa i ngā taiao hangahanga e rua.

He aha e kore ai e whakamahi i tētahi mīhini SMT tikanga mō ngā mate tahanga?

Ko te tikanga, ka arotauhia te mīhini SMT tuku iho mō ngā wāhanga e tukuna ana i roto i ngā whāngai, i ngā paepae rānei. Ko te tukatuka wafer tika e hiahia ana ki ngā raraunga mahere wafer, te wehenga mate, ngā mahi pana me te huri, te ārai mate, te tirotiro motuhake me te whai i te taumata mate.

Ka taea e te CA2 te tukatuka i ngā SMD me ngā mate tahanga i runga i te papa kotahi?

Āe. Ko tēnei āheinga rauemi-whakaranu tētahi o ngā kaupapa matua o te tūāpapa. Ko te raupapatanga tika e whakawhirinaki ana ki ngā whāngai kua tāutahia, te pūnaha wafer, ngā pane whakatakotoranga, ngā kōwae tukanga me te kaupapa hua.

Ka whakakorea rānei te rīpene mate i te tango tika i te wafer?

Ka taea e ia te whakakore i te hiahia ki te huri i ngā mate e tika ana hei rīpene i mua i te whakatakotoranga. Ko te tika o tēnei mea kei runga i te whakatakotoranga o te papa, te āhua o te mate, ngā raraunga mate-pai e mōhiotia ana me te whirihoranga whakahaere-papa kua tāutahia.

Me pēhea te pupuri a te CA2 i te tere ina kohi ana i ngā maketi mai i tētahi wafer?

Ka whakamahia e te tūāpapa te parenga mate me te whakarite whakarara. Ka taea te wetewete me te whakarite i ngā mate i te mea kei te tukatuka tonu te pane whakanoho i ētahi atu wāhanga, ka whakaiti i te whakaroa e pā ana ki te kohi tika o te wafer.

He aha te mahi whakatakotoranga whakaputanga mōrahi rawa atu?

E eke ana ngā uara tūāpapa kua whakaputaina ki te 76,000 ngā wāhanga ia hāora mō te whakatakotoranga SMT, 54,000 ngā mate ia hāora mō te tāpiri mate mai i te papa whakarewa, me te 51,000 ngā mate ia hāora mō te whakatakotoranga maramara-hurihuri. Ko te putanga tuturu e whakawhirinaki ana ki te whirihoranga mīhini me te hua.

Ka taea e te tatūnga CA2 kotahi te whakamahi i ngā momo wafer rerekē?

Mā te whirihoranga whakawhiti wafer e tika ana, ka taea e te papaaho te pupuri i te 50 momo wafer rerekē. Ka tautokohia e tēnei ngā hua e whakakotahi ana i ngā momo mate maha, i runga anō i te pūnaha wafer kua tāutahia me te tatūnga hōtaka.

He aha te tikanga o te whai i te taumata-kotahi o te mate?

Ko te tikanga ka taea te hono i tētahi mate takitahi mai i tōna tūranga kohi i runga i te anga pūtake ki tōna tūranga whakatakotoranga whakamutunga i runga i te papa, me ngā raraunga whakaputa me te tirotiro e tika ana.

Ka taea e te CA2 te whakakapi i ngā hononga mate katoa kua whakatapua?

Kāo. Ko ngā tono e hiahia ana ki te kaha honohono motuhake, te whakamahana, te whakamaroke, te tohatoha, te whakatakotoranga mate rānei i waho o te awhe kua tāutahia, me whai taputapu huihuinga haurua-ira motuhake pea.

Ka taea te whakamahi i te CA2 me te SIPLACE TX micron?

Āe. Ka taea te whakarite i ngā mīhini ki te raina whakaputa SiP kotahi, me te whakatakotoranga whāngai tere-teitei, tika-teitei rānei e taurite ana ki ngā mahi whakatakotoranga wafer-tika me te ranu.

He aha ngā mōhiohio e hiahiatia ana hei taurite i tētahi mīhini CA2 kua whakamahia?

Whakaratohia ngā whakatakotoranga o te mate me te anga, ngā rahi o te papa, te tika e hiahiatia ana, te whānuitanga o ngā wāhanga, te putanga ūnga, te manakohanga o te kaikawe, ngā kōwhiringa tukanga, ngā whakaritenga whai, te āhua o te mīhini e pai ana me te ūnga.

Arotakehia he SIPLACE CA2 mō tō Tukanga Tākai Matatau

Tukuna mai te whakatakotoranga o te anga, ngā rahi o te mate, te rahi o te papa, te ranunga wāhanga, te ūnga tika, te putanga e tumanakohia ana me ngā kōwhiringa tukanga e hiahiatia ana hei arotake whirihoranga.

Tono Arotake Whirihoranga